TAPD617SWLF14 - Peel, Large Flange Pee
Check Availability
This product is not available to buy online, please contact us for more information.
Technical Specification
| Code/Part No./Desc | TAPD617SWLF14* |
|---|---|
| Rivet Type | Peel Ideal for joining softer and more brittle materials such as plastics, rubber, wood, GFRP or laminates. |
| Rivet Head | Large Flange For use where thin or vulnerable materials are fastened to a rigid backing. The large flange is also useful for covering enlarged holes or slots in the upper component. |
| Rivet Body Material | Aluminium - 3.5% Magnesium Alloy (AIMg 3,5) |
| Rivet Mandrel Material | Steel |
| Weight | 1.75 kg |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|
| 4.8 mm | 19 mm | 0.1 mm - 13.5 mm |
5 mm | 14 mm | 2 mm | 2.64 mm |
*Rivet may be subject to minimum quantities.
Key
|
|
Nominal Diameter (Min-Max Diameter) The nominal diameter of the rivet body and the minimum and maximum diameter dimensions are stated. |
|---|---|
|
|
Body Length (+/- 0.5mm) The nominal rivet body length is stated. A tolerance of +/- 0.5mm should be allowed for. |
|
|
Grip Range (Min-Max) This is the recommended thickness range over which the body length will consistently provide a good setting in a hole of the specified diameter. |
|
|
Hole Size This is the recommended diameter range of the drilled/punched hole which should be burr free. |
|
|
Flange Diameter (Min-Max) The rivet flange diameter is stated at minimum and maximum dimensions. |
|
|
Flange Thickness (Max) The maximum flange thickness is stated. |
|
|
Nominal Mandrel Diameter The nominal (or maximum value for grooved mandrels) is shown to assist in the selection of the correct rivet tool nosepiece. |
|
|
Shear Performance The shear figures quoted are indicative of the performance of the rivet. Actual performance will depend on workpiece material types and thickness. |
|
|
Tensile Performance The tensile figures quoted are indicative of the performance of the rivet. Actual performance will depend on workpiece material types and thickness. |
